It pinches a little, especially every two hours of so while I’m asleep, but nothing is turning blue or getting too cold. I don’t fill the tube, so you might think escape would be easy, but the secret seems to be to adjust the tube and rings to trap the scrotum in the slot between the tuba and the ring.

We’ll see. It comes off on Saturday when the kid is away at camp.

PS. The redirector infestation seems to be solved.

I have a similar device (clamshell ring and cage device, *not* a Fort) with the same pull-down issue. I fixed that by obtaining a piece of twisted link chain large enough to go around my waist at hip-level. I recommend using stainless steel chain from a boat supply house since nickel plated chain soon discolors. I attached two high-quality coil-type keyring hoops, one to each end. The chain goes round the waist and is locked through the end links (not the rings). My device has a tang on the clamshell ring that goes through a matching tang on the cage, and the lock goes through matching holes in the ring tang ends to secure the whole thing. I pass the lock through one chain-end ring, then the tang on the device’s ring, then the other chain-end ring. This locks the device and holds it close to my stomach, preventing downward pull-down. The rings cannot be wound out of the arrangement because of how everything sits.

I am interested in the Fort device, but my current one has another issue: when wearing the device during the day my testicles can escape because the cage lifts enough to provide the necessary clearance for my “grower” equipment. This is an issue I doubt tighter rings can solve, certainly not safely, and wonder if your subject can escape the Fort in the same way. I really can’t afford to buy a Fort only to find it can’t keep me in.

Thanks again for the review.

So, what about piercing Boy Toys cock and using a cable on the piercing to prevent pullout? If I go for the Fort I will pierce.

I always found it a bit ridiculous to wear with a plastic device (it seems odd to have such a heavy belt with a light weight device). with the fort it might create an interesting option for a less expensive full steel belt…

Just wondering…

thanks for your comments on this device.

Real cost after adding customs clearance, duty, shipping is more like £223 (GBP). In the UK a CB6000 is around £95.

It is definitely impressive, much more solid than my Gerecke steel device. In real terms security is similar since the weak point for both is the lock but psychologically it feels a lot more secure, a combination of appearance, weight and tighter more enclosing fit.

Looks like hygiene will be easier than the CB6000 in terms of both cleaning and urinating.

The KSD-G3 does not fit as I would like. There is a slight lip to the entrance to the tube and the tube is a little lower down from the locking post hole than in a CB6000. It is workable but will be better when I have had a go at the K3 to alter its upper part to fit better.

Somehow I’m going to need to find a way to get a custom locking pin made once I have decided on long term setup. The current one sticks out too far. Given they provide five rings it seems miserly to have just one length of post.

My 15mm Asus padlock sits fairly flat and surprisingly the bulge under clothing is certainly no worse than a Cb6000, possibly slightly less.

Security with the K3 is good. I suspect I could pull out but that to do so would leave me cut and bruised, I tried and decided not to take the experiment to self mutilating extremes.

Weight is … interesting. Here are some figures, all with smallest K3 and lock:-

CB6000S – 73g
CB6000 – 83g
Gerecke – 199g
Fort – 352g (or using 2 smallest rings 473g)

Not only won’t this go through airport security I’d suggest not even walking past the building

Despite the weight after a few hours it is surprisingly unnoticeable.

I’ll be making an add on to enable use of my frenum piercing ring for security after which I’ll do some longer term wear trials but certainly it is comfortable and I’m very happy with it.

Given it is adjustable, and with the K3 secure, this is perhaps the best device yet for the fantasy of springing non consensual chastity on someone without warning. Using a modified long hasp padlock (jammed shut with superglue) in place of the locking pin it should be proof against all but an angle grinder or several hours with a HSS handsaw.

Michael.

Promises, promises.

The weight issue is one I’m familiar with when wearing the Steelheart, though this device looks like it’s a bit heavier. Hard to say. I’ve already seen your next post, so I know you’d *ahem* licked the problem.

In the UK I believe I might be excused customs if it were a gift and they labeled it as such.
Another possibility might be having it declared as a medical device for the treatment of a chronic condition which would exempt it from VAT.

I have bought several lower and one higher value items from US ebay sellers and not been hit by customs so I suspect there is an element of luck and an element of who the carrier is. Given it was UPS I expected a charge, based on past experience, and indeed their website has it flagged as “SHIPMENT ON HOLD AWAITING PAYMENT OF DUTY & TAX / BROKERAGE RELEASED SHIPMENT. SHIPMENT IS SUBMITTED TO CLEARING AGENCY FOR FURTHER CLEARANCE”

Anyway, it has traveled from Ontario, CA to Philadelphia, PA and onwards to East Midlands Airport, GB. Wouldn’t it be cute if UPS could continue the tracking so one could have ongoing 24/7 tracking location accessed by the internet

Michael